TP-Link AC1200 Wireless MU-MIMO Gigabit Router – TL-ARCHER C6

KSh7,000.00

Wireless MU-MIMO Gigabit Router
Supports 802.11ac standard
Simultaneous 2.4GHz 300 Mbps and 5GHz 867 Mbps connections for 1200 Mbps of total available bandwidth*
4 external antennas and one internal antenna provide stable wireless connections and optimal coverage*
Easy network management at your fingertips with the TP-Link Tether app
MU-MIMO achieves 2X efficiency by communicating with up to 2 devices at once**
Beamforming technology concentrates signal to your devices
Supports Access Point mode to create a new WiFi access point

Description
Reviews (0)

TP-Link Archer C6 AC1200 Wireless MU-MIMO Gigabit Router

These days, a good Wi-Fi router isn’t just a nice thing to have—it’s a must. Whether you’re watching videos, gaming, video chatting, or working from home, the TP-Link Archer C6 AC1200 Wireless MU-MIMO Gigabit Router does the job without costing a fortune.

Specs

Model: TP-Link Archer C6 (TL-ARCHER C6)
Wi-Fi: Dual-Band AC1200 (867 Mbps on 5 GHz + 300 Mbps on 2.4 GHz)
Tech: MU-MIMO + Beamforming
Ports: 4× Gigabit LAN + 1× Gigabit WAN
Antennas: 4× High-Gain External Antennas
Processor: Single-core CPU
Stuff it does: Guest Network, Parental Controls, IPv6, Access Point Mode, Tether App
Coverage: About 2,000–2,500 sq ft (good for most homes)
Devices: Works with 30–40 devices at once

Why the TP-Link Archer C6 is a Good Pick

Even with newer Wi-Fi 6 routers around, the Archer C6 still works well for most homes and small businesses. Here’s why:

1. Solid Dual-Band AC1200

The Archer C6 uses both 2.4 GHz and 5 GHz bands:

– 2.4 GHz (300 Mbps) → Good for browsing, emails, and smart home gadgets

– 5 GHz (867 Mbps) → Great for videos, gaming, and big downloads

That’s about 1200 Mbps total, which is plenty for most internet plans up to 500–600 Mbps.

2. MU-MIMO Tech = No More Waiting

Old routers do one thing at a time, which slows things down when lots of devices are online. The Archer C6 uses 2×2 MU-MIMO, so it can handle multiple devices at once. This means smoother streaming, faster downloads, and less lag, even with everyone using the internet.

3. Beamforming = Stronger Signals

Instead of sending Wi-Fi everywhere (and wasting it on walls), Beamforming figures out where your devices are and focuses the signal there. This gives you:

– Better range on the 5 GHz band

– Fewer dead spots

– Stronger signal in those far-off corners

4. Four Antennas

The four antennas, along with Beamforming, give the Archer C6 good coverage. It can easily cover most apartments and even some two-story houses without needing extra help.

5. Gigabit Ethernet Ports

All five ports (1 WAN + 4 LAN) are Gigabit (1000 Mbps). This means:

– You get the most out of fast internet plans

– Quick file sharing between computers

– No slowdowns if you use wired connections for mesh systems later

6. Easy Setup with the TP-Link Tether App

Setting up the Archer C6 is quick:

1. Plug it in

2. Connect to the Wi-Fi or use an Ethernet cable

3. Open the Tether app (or go to tplinkwifi.net)

4. Follow the steps

After that, you can:

– Make a Guest Network

– Set Parental Controls

– Prioritize devices for gaming or streaming

– See who’s online and block unwanted users

7. Access Point Mode

Got a good router but need better coverage somewhere? Put the Archer C6 in Access Point mode and connect it with an Ethernet cable—now it’s a Wi-Fi hotspot.

Good for:

Homes with 100–500 Mbps internet

Most apartments and houses

Small offices and cafes

People who want good performance without spending extra on Wi-Fi 6

-Anyone replacing an old router

If you have super-fast internet and tons of devices, you might want a Wi-Fi 6 router. But for most people, the Archer C6 will be fine for years to come.